Planet GS-5220 Series User Manual page 2

User's Manual of GS-5220 LCD Series
Trademarks
Copyright © PLANET Technology Corp. 2017.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality,
performance, merchantability, or fitness for a particular purpose. PLANET has made every effort to ensure that
this User's Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does not represent a commitment on
the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's
Manual. PLANET makes no commitment to update or keep current the information in this User's Manual, and
reserves the right to make improvements to this User's Manual and/or to the products described in this User's
Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your
comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own
expense.
CE Mark Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause
radio interference.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy saving, please remove the
power cable to disconnect the device from the power circuit. In view of saving the energy and reducing the
unnecessary power consumption, it is strongly suggested to remove the power connection for the device if this
device is not intended to be active.
2