Transmit Hold Count
•
Advanced Settings
Object
•
Edge Port BPDU
Filtering
•
Edge Port BPDU
Guard
• Port Error Recovery
•
Port Error Recovery
Timeout
The Managed Switch implements the Rapid Spanning Protocol as the default spanning
tree protocol. When selecting "Compatibles" mode, the system uses the RSTP (802.1w)
to be compatible and to co-work with another STP (802.1D)'s BPDU control packet.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
The number of BPDU's a bridge port can send per second. When
exceeded, transmission of the next BPDU will be delayed. Valid values
are in the range 1 to 10 BPDU's per second.
Description
Control whether a port explicitly configured as Edge will transmit and
receive BPDUs.
Control whether a port explicitly configured as Edge will disable itself
upon reception of a BPDU. The port will enter the error-disabled state,
and will be removed from the active topology.
Control whether a port in the error-disabled state automatically will be
enabled after a certain time. If recovery is not enabled, ports have to
be disabled and re-enabled for normal STP operation. The condition is
also cleared by a system reboot.
The time that has to pass before a port in the error-disabled state can
be enabled. Valid values are between 30 and 86400 seconds (24 hours).
235
User's Manual of GS-5220 LCD Series