Planet GS-5220 Series User Manual page 302

• Queue Shaper Rate
• Queue Shaper Unit
• Queue Shaper Excess
• Queue Scheduler
Weight
• Queue Scheduler
Percent
• Port Shaper Enable
• Port Shaper Rate
• Port Shaper Unit
Controls the rate for the queue shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it
is restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the queue shaper rate as "kbps" or
"Mbps".
The default value is "kbps".
Controls whether the queue is allowed to use excess bandwidth.
Controls the weight for this queue.
This value is restricted to 1-100. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
The default value is "17".
Shows the weight in percent for this queue. This parameter is only
shown if "Scheduler Mode" is set to "Weighted".
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it
is restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the port shaper rate as "kbps" or
"Mbps".
The default value is "kbps".
302
User's Manual of GS-5220 LCD Series