Planet GS-5220 Series User Manual page 372

• Hold Time
• RADIUS-Assigned
QoS Enabled
This setting applies to the following modes, i.e. modes using the Port
Security functionality to secure MAC addresses:
Single 802.1X
■
Multi 802.1X
■
MAC-Based Auth.
■
If a client is denied access, either because the RADIUS server denies the
client access or because the RADIUS server request times out
(according to the timeout specified on the
"Configuration→Security→AAA" page), the client is put on hold in the
Unauthorized state. The hold timer does not count during an on-going
authentication.
In MAC-based Auth. mode, the switch will ignore new frames coming
from the client during the hold time.
The Hold Time can be set to a number between 10 and 1000000
seconds.
RADIUS-assigned QoS provides a means to centrally control the traffic
class to which traffic coming from a successfully authenticated
supplicant is assigned on the switch. The RADIUS server must be
configured to transmit special RADIUS attributes to take advantage of
this feature.
The "RADIUS-Assigned QoS Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned QoS Class functionality.
When checked, the individual ports' ditto setting determines whether
RADIUS-assigned QoS Class is enabled for that port. When unchecked,
RADIUS-server assigned QoS Class is disabled for all ports.
372
User's Manual of GS-5220 LCD Series