Planet GS-5220 Series User Manual page 339

Action Specify the action to take with a frame that hits this ACE.
•
• Rate Limiter Specify the rate limiter in number of base units.
The allowed range is 1 to 16.
Disabled indicates that the rate limiter operation is disabled.
• Port Redirect Frames that hit the ACE are redirected to the port number specified here.
The allowed range is the same as the switch port number range.
Disabled indicates that the port redirect operation is disabled.
• Logging Specify the logging operation of the ACE. The allowed values are:
Note: The logging feature only works when the packet length is less than
1518(without VLAN tags) and the System Log memory size and logging rate is
limited.
• Shutdown Specify the port shut down operation of the ACE. The allowed values are:
Note: The shutdown feature only works when the packet length is less than
1518(without VLAN tags).
• Counter The counter indicates the number of times the ACE was hit by a frame.
Permit: The frame that hits this ACE is granted permission for the
■
ACE operation.
Deny: The frame that hits this ACE is dropped.
■
Enabled: Frames matching the ACE are stored in the System Log.
■
Disabled: Frames matching the ACE are not logged.
■
Enabled: If a frame matches the ACE, the ingress port will be
■
disabled.
Disabled: Port shut down is disabled for the ACE.
■
339
User's Manual of GS-5220 LCD Series