System Reboot - Planet GS-5220 Series User Manual

new configuration is available immediately, which means that no restart is necessary. The Factory Default screen
in Figure 4-2-29 appears.
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the Port State page without resetting the configuration.
To reset the Managed Switch to the Factory default setting, you can also press the hardware
reset button at the front panel about 10 seconds. After the device is rebooted, you can login
the management Web interface within the same subnet of 192.168.0.xx.

4.2.25 System Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed,
user has to re-login the Web interface about 60 seconds later; the System Reboot screen in
appears.
Figure 4-2-29: Factory Default Page Screenshot
140
User's Manual of GS-5220 LCD Series
Figure 4-2-30