Power Over Ethernet Powered Device - Planet GS-5220 Series User Manual

4.16.1 Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
3~25 watts
Voice over IP phones
Enterprises can install PoE VoIP phones, ATA sand other
Ethernet/non-Ethernet end-devices in the center where UPS is
installed for un-interruptible power system and power control
system.
Wireless LAN Access Points
Access points can be installed at museums, sightseeing sites,
airports, hotels, campuses, factories, warehouses, etc.
IP Surveillance
IP cameras can be installed at enterprises, museums, campuses,
hospitals, banks, etc. without worrying about electrical outlets.
PoE Splitter
PoE Splitter split the PoE 56V DC over the Ethernet cable into
5/12V DC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.
High Power PoE Splitter
High PoE Splitter split the PoE 56V DC over the Ethernet cable into
24/12V DC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.
493
User's Manual of GS-5220 LCD Series