Installing The Sfp/Sfp+ Transceiver - Planet GS-5220 Series User Manual

Step 6: Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and
supply power to the Managed Switch.

2.2.3 Installing the SFP/SFP+ Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without
having to power down the Managed Switch, as the
Approved PLANET SFP/SFP+ Transceivers

PLANET Managed Switch supports both single mode and multi-mode SFP/SFP+ transceivers. The following list of
approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
Gigabit Ethernet Transceiver (1000BASE-X SFP)
Model Speed (Mbps) Connector Interface
MGB-GT 1000
MGB-SX 1000
Figure 2-2-4
Figure 2-2-4: Plug-in the SFP/SFP+ Transceiver
Fiber Mode
Copper --
LC Multi Mode
80
User's Manual of GS-5220 LCD Series
shows..
Wavelength (nm)
Distance
100m --
550m 850nm
Operating Temp.
0 ~ 60 degrees C
0 ~ 60 degrees C