Planet GS-5220 Series User Manual page 277

• Compatibility
• PRI
• RV
• QI
• QRI
• LLQI (LMQI for IGMP)
• URI
Compatibility is maintained by hosts and routers taking appropriate
actions depending on the versions of MLD operating on hosts and
routers within a network. The allowed selection is MLD-Auto,
Forced MLDv1, Forced MLDv2, default compatibility value is
MLD-Auto.
(PRI) Priority of Interface. It indicates the MLD control frame priority
level generated by the system. These values can be used to prioritize
different classes of traffic. The allowed range is 0 (best effort) to 7
(highest), default interface priority value is 0
Robustness Variable. The Robustness Variable allows tuning for the
expected packet loss on a network. The allowed range is 1 to 255,
default robustness variable value is 2.
Query Interval. The Query Interval is the interval between General
Queries sent by the Querier. The allowed range is 1 to 31744 seconds,
default query interval is 125 seconds.
Query Response Interval. The Max Response Time used to calculate the
Max Resp Code inserted into the periodic General Queries. The allowed
range is 0 to 31744 in tenths of seconds, default query response
interval is 100 in tenths of seconds (10 seconds).
Last Member Query Interval. The Last Member Query Time is the time
value represented by the Last Member Query Interval, multiplied by
the Last Member Query Count. The allowed range is 0 to 31744 in
tenths of seconds, default last member query interval is 10 in tenths of
seconds (1 second).
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second.
277
User's Manual of GS-5220 LCD Series