Planet GS-5220 Series User Manual page 110

• Privilege Level
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user).
Once the new user is added, the new user entry is shown on the Users Configuration page.
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can
access all groups, i.e. that is granted the fully control of the device. But
others value need to refer to each group privilege level. User's privilege
should be same or greater than the group privilege level to have the
access of that group.
By default setting, most groups privilege level 5 has the read-only
access and privilege level 10 has the read-write access. And the system
maintenance (software upload, factory defaults and etc.) needs user
privilege level 15.
Generally, the privilege level 15 can be used for an administrator
account, privilege level 10 for a standard user account and privilege
level 5 for a guest account.
Figure 4-2-6: User Configuration Page Screenshot
110
User's Manual of GS-5220 LCD Series