Request/Reply
•
•
Sender IP Filter
Sender IP Address
•
•
Sender IP Mask
• Target IP Filter
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
Request: Frame must have ARP Request or RARP Request OP flag
■
set.
Reply: Frame must have ARP Reply or RARP Reply OP flag.
■
Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is
■
"don't-care".)
Host: Sender IP filter is set to Host. Specify the sender IP address
■
in the SIP Address field that appears.
Network: Sender IP filter is set to Network. Specify the sender IP
■
address and sender IP mask in the SIP Address and SIP Mask fields
that appear.
When "Host" or "Network" is selected for the sender IP filter, you can
enter a specific sender IP address in dotted decimal notation.
When "Network" is selected for the sender IP filter, you can enter a
specific sender IP mask in dotted decimal notation.
Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is
■
"don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address
■
in the Target IP Address field that appears.
Network: Target IP filter is set to Network. Specify the target IP
■
address and target IP mask in the Target IP Address and Target IP
Mask fields that appear.
342
User's Manual of GS-5220 LCD Series