Remote Syslog - Planet GS-5220 Series User Manual

: Updates the system log entry to the last available entry ID.
: Print the system log entry to the current entry ID.

4.2.14 Remote Syslog

Configure remote syslog on this page. The Remote Syslog screen in
The page includes the following fields:
Object
• Mode
• Syslog Server IP
Figure 4-2-17: Remote Syslog Page Screenshot
Description
Indicates the server mode operation. When the mode operation is
enabled, the syslog message will send out to syslog server. The syslog
protocol is based on UDP communication and received on UDP port
514 and the syslog server will not send acknowledgments back sender
since UDP is a connectionless protocol and it does not provide
acknowledgments. The syslog packet will always send out even if the
syslog server does not exist. Possible modes are:
Enabled: Enable remote syslog mode operation.

Disabled: Disable remote syslog mode operation.

Indicates the IPv4 host address of syslog server. If the switch provides
DNS feature, it also can be a host name.
129
User's Manual of GS-5220 LCD Series
Figure 4-2-17 appears.