Step 3:
Secure the brackets tightly.
Step 4:
Follow the same steps to attach the second bracket to the opposite side.
Step 5:
After the brackets are attached to the Managed Switch, use suitable screws to securely attach the
brackets to the
Figure 2-2-2: Attach Brackets to the Managed Switch.
You must use the screws supplied with the mounting brackets. Damage caused to
the parts by using incorrect screws would invalidate the warranty.
rack, as shown in
Figure
Figure 2-2-3: Mounting Managed Switch in a Rack
2-2-3.
79
User's Manual of GS-5220 LCD Series