Planet GS-5220 Series User Manual page 161

• Port Description
Link
•
• Current Link Speed
• Configured Link
Speed
• Adv Duplex
• Adv speed
Indicates the per port description.
The current link state is displayed graphically. Green indicates the link is
up and red indicates the link is down.
Provides the current link speed of the port.
Select any available link speed for the given switch port. Draw the
menu bar to select the mode.
Auto – Set up Auto negotiation for copper interface.

10Mbps HDX - Force sets 10Mbps/Half-Duplex mode.

10Mbps FDX - Force sets 10Mbps/Full-Duplex mode.

100Mbps HDX - Force sets 100Mbps/Half-Duplex mode.

100Mbps FDX - Force sets 100Mbps/Full-Duplex mode.

1Gbps FDX - Force sets 10000Mbps/Full-Duplex mode.

Auto Fiber (10G) – Set up 10G fiber port for negotiation

automatically.
Disable – Shut down the port manually.

When duplex is set as auto i.e auto negotiation, the port will only
advertise the specified duplex as either Fdx or Hdxto the link partner.
By default port will advertise all the supported duplexes if the Duplex is
Auto.
When Speed is set as auto i.e auto negotiation, the port will only
advertise the specified speeds (10M 100M 1G) to the link partner. By
default port will advertise all the supported speeds if speed is set as
Auto.
161
User's Manual of GS-5220 LCD Series