Installing The Switch - Planet FSD-604HP User Manual

6. Installing the Switch

This part describes how to install your FSD-604HP and
make connections to it. Please read the following topics
and follow the procedures as presented.
This FSD-604HP does not need software
configuration.
Note
Desktop Installation
To install the FSD-604HP on desktop, simply follow the
following steps:
Step 1: Place the FSD-604HP on desktop near an
electrical outlet.
Step 2: Keep enough ventilation space between the
FSD-604HP and the surrounding objects.
When choosing a location, please keep in
mind the environmental restrictions dis-
cussed in Chapter 7 -- Product Specifica-
Note
tions.
Step 3: Connect your FSD-504HP to network devices.
A. Connect one end of a standard network
cable to the Port-5~6 of the FSD-604HP
that marks with "Uplink".
- 8 -