Planet GS-5220 Series User Manual page 396

• Retransmit
• Dead Time
• Key
• NAS-IP-Address
• NAS-IPv6-Address
• NAS-Identifier
Server Configuration
The table has one row for each RADIUS Server and a number of columns, which are:
Object
Retransmit is the number of times, in the range from 1 to 1000; a
RADIUS request is retransmitted to a server that is not responding. If
the server has not responded after the last retransmit, it is considered
to be dead.
The Dead Time, which can be set to a number between 0 and 3600
seconds, is the period during which the switch will not send new
requests to a server that has failed to respond to a previous request.
This will stop the switch from continually trying to contact a server that
it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this
feature, but only if more than one server has been configured.
The secret key - up to 63 characters long - shared between the RADIUS
server and the switch.
The IPv4 address to be used as attribute 4 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing
interface is used.
The IPv6 address to be used as attribute 95 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing
interface is used.
The identifier - up to 253 characters long - to be used as attribute 32 in
RADIUS Access-Request packets. If this field is left blank, the
NAS-Identifier is not included in the packet.
Description
396
User's Manual of GS-5220 LCD Series