Table of Contents
Advertisement
Quick Links
Trademarks
Copyright © PLANET Technology Corp. 2003.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trade-
marks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Revision
PLANET Gigabit Ethernet Switch User's Manual
FOR MODELS: GSD-801/501
Part No.: EM_GSD801
Advertisement
Table of Contents
Related Manuals for Planet GSD-801
Summary of Contents for Planet GSD-801
-
Page 1: Fcc Warning
Trademarks Copyright © PLANET Technology Corp. 2003. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trade- marks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in... -
Page 2: Table Of Contents
Table of Contents Chapter 1 Introduction 1.1 Package Contents 1.2 How to Use This Manual 1.3 Product Features 1.4 Product Specifications Chapter 2 INSTALLATION 2.1 Product Description Chapter 3 SWITCH OPERATION 3.1 Address Table 3.2 Learning 3.3 Forwarding & Filtering 3.4 Store-and-Forward 3.5 Auto-Negotiation Chapter 4 TROUBLESHOOTING... -
Page 3: Chapter 1 Introduction
1.2 How to Use This Manual This Gigabit Ethernet Switch User Manual is structured as follows: ● Section 2, Installation It explains the functions of GSD-801/501 and how to physically install the GSD-801/501. ● Section 3, Configuration It contains troubleshooting and specifications of GSD-801/501. -
Page 4: Product Specifications
1.4 Product Specifications Model GSD-801 GSD-501 Hardware Specification Network ports 8 10/100/1000Base-T 5 10/100/1000Base-T RJ-45 MDI/MDI-X ports RJ-45 MDI/MDI-X ports Dimensions 210 x 148 x 35 mm 145 x 115 x 29 mm Weight 1.0 kg 0.6kg Power Requirement External Power adapter 12V DC 1.25A... -
Page 5: Chapter 2 Installation
GSD-801 provides 16Gbps non-blocking switch fabric, 8k MAC Address table and GSD- 501 provides 10Gbps non-blocking switch fabric, 4k MAC Address table. Both the GSD-801 and the GSD-501 are support 802.3x full duplex flow control and also offers wire-speed packet transfer performance without risk of packet loss. - Page 6 Lit: indicate that the port is operating at 100Mbps. 1000 Green Lit: indicate that the port is operating at 1000Mbps 2.1.4 GSD-801/501 Rear Panel The rear panel of the Switch indicates a DC External power adapter, Figure 2-3 Rear Panel of GSD-801 Figure 2-4 Rear Panel of GSD-501...
-
Page 7: Desktop Installation
GSD-801/501 on a desktop or shelf, simply complete the following steps. 2.2.1 Desktop Installation To install a GSD-801/501 on a desktop or shelf, simply complete the following steps: Step1: Attach the rubber feet to the recessed areas on the bottom of the switch. -
Page 9: Chapter 3 Switch Operation
Chapter 3 SWITCH OPERATION 3.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning process of Ethernet Switch. -
Page 10: Auto-Negotiation
The Switch performs “Store and forward” therefore, no error packets occur. More reliably, it reduces the re-transmission rate. No packet loss will occur. The Switch performs “Store and forward” therefore, no error packets occur. More reliably, it reduces the re-transmission rate. No packet loss will occur. 3.5 Auto-Negotiation The STP ports on the Switch have built-in “Auto-negotiation”. -
Page 11: Chapter 4 Troubleshooting
Chapter 4 TROUBLESHOOTING This chapter contains information to help you solve problems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remove duplex mode of the Giga Switch Some stations can not talk to other stations located on The other port Solution:... -
Page 13: Appendix A
APPENDIX A A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. - Page 18 Part No.:EM_GSD801...