Confirmation Report Override - Xerox 665 System Administrator Manual

Reports
9-18

Confirmation Report Override

A Confirmation Report can be printed automatically for each
communication job by setting the default report print option (see the
previous section, "Confirmation Report Setup").
When you set the report print status using the Confirmation Function
Key, the setting you select is active for the current job only.
The Communication Report print status can also be set when
assigning Speed Dial and One Touch numbers, if communication with
a certain remote party always requires the option (see Chapter 2,
"Setting up the Phonebook").
To set the Confirmation Report print status for this job:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast .
3. Press:
Confirm.
4. Select the report print status:
To automatically print a report when the transmission occurs,
press .
To print a report only if an error occurs, press
To select not to print a confirmation report for this transmission,
press .
5. Using one of the dialing methods, enter the phone number and
press Enter , if necessary.
The document is sent and, if selected, a report is printed.
Confirmation report
1. Always
2. On error
3. Off
.
Free memory:
Enter fax number
WorkCentre Pro 665/685/765/785
100%