Receive To Memory - Xerox 665 System Administrator Manual

Receiving Documents
3-8

Receive to Memory

When this feature is enabled and the printer is not available, the
machine automatically receives the document to memory. If this
feature is disabled, the machine does not answer the phone. A
receive to memory operation occurs if the paper tray is empty, the
paper is jammed, or the toner is empty. The message "Document in
Memory" displays when you have documents stored in memory. The
machine automatically prints when the problem is corrected.
If the memory becomes full while the machine is receiving a
document, the machine terminates the operation but retains the
pages it received successfully.
Note: Receive to Memory does not occur when the Free Memory
is zero or 100 jobs have been received. If the Free Memory
becomes zero during Receive to Memory, document
reception stops and no further receptions are possible until
memory becomes available.
To enable the Receive to Memory feature:
1. Press:
Menu
Receive to memory
1. On
2. Off
WorkCentre Pro 665/685/765/785