Xerox 665 System Administrator Manual page 69

WorkCentre Pro 665/685/765/785
3. When you select the Automatic mode, using the Numeric
Keypad, enter the time period (in minutes) for standby before the
machine enters the Super Power Save mode automatically.
4. When you select the Manual mode or Off, select the default for
the Printer Power Save mode
•
Printer Power Save - Turns the printer heater off to save power
consumption.
Press:
Menu
Select the Manual mode, press
To enable the Printer Power Save mode, press
To disable the Printer Power Save mode, press
5. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
Programming the Machine
Entering time
Time
***
. Then, go to Step 4.
Printer power save
1. On
2. Off
(01-60min)
03
.
.
2-49