Itu-T Relay Communications; Itu-T Relay Transmission - Xerox 665 System Administrator Manual

Transmitting Documents

ITU-T Relay Communications

5-34
Relay Communication allows you to send documents from your fax
machine (initiating station) to one fax machine (relay station), which
further sends them to additional fax machines (end stations). If you
have several end stations in one or more regional areas you can save
time and phone expense by setting up a relay system.

ITU-T Relay Transmission

To perform a ITU-T relay operation, the following information must be
programmed in your machine.
Initiating Station Setup:
•
Assign the relay station telephone number to a One Touch Key or
Speed Dial number
Relay Station Setup:
•
The relay station must program the end station telephone
numbers to Speed Dial numbers One Touch numbers or Group
numbers. Up to 50 speed dial numbers or one touch numbers or
groups can be programmed. The relay station must use the
"Presetting Relay Box" procedure.
•
The relay station must provide these numbers and any required
passwords to the Initiating Station.
Example:
1 Originator
Initiating
Station
Relay station Relay box
box number/ numbers/passw
password/relay ords/end station
station number numbers
programmed to programmed to
a Speed Dial Speed Dial
number or One numbers, One
Touch key on Touch keys, or
the Initiating Groups.
Station.
1 Relay End Stations (up to
Station 50 stations/groups)
End
Station
Relay
Box
End
Station
WorkCentre Pro 665/685/765/785