Cleaning The Developer Assembly And The Surrounding Parts - Xerox 665 System Administrator Manual

WorkCentre Pro 665/685/765/785
Cleaning the Developer Assembly and the
Surrounding Parts
The period for cleaning all the parts associated with the Developer
Assembly is every 3,000 pages and at 10,000 pages, or every 6
months. Clean the following parts of the machine when you replace
the toner cartridge or the Drum Unit:
•
Transfer Wire and Discharge Wire —The Transfer Wire and the
Discharge Wire are located under the Developer Assembly inside
the machine.
•
Paper Guide —The Paper Guide is located under the Developer
Assembly inside the machine.
•
Developer Assembly —The Developer Assembly has a Mylar
Sheet below the toner roller.
B-23