Chapter 6 Cancelling Jobs; Stop Key; Job Status Key - Xerox 665 System Administrator Manual

6 Cancelling Jobs

Stop Key

Job Status Key

WorkCentre Pro 665/685/765/785
Jobs on the WorkCentre can be cancelled by pressing the Job
Status key or the Cancel Job key.
Active jobs on the WorkCentre can be cancelled by pressing the Job
Status key. The Job Status key allows you to monitor and cancel the
active job being processed.
Pending jobs can be cancelled by pressing the Cancel Job key and
selecting from the list of pending jobs. The Cancel Job key allows
you to cancel pending jobs by job type.
Pressing Stop alone does not cancel a Memory or Pending job. You
must use the Cancel Job or Job Status keys to initiate the cancel
procedure.
The Stop key is used to eject the document from the scanner prior to
scanning, and to cancel Direct Send jobs.
The active job can be monitored in the display and cancelled if
desired. When you press the Job Status key, the job currently being
processed is displayed.
To monitor and/or cancel the active job:
1. Press:
Job Status
Cancelling Jobs
Dialing
Job number:
5551212
006
6-1