Xerox 665 System Administrator Manual page 55

WorkCentre Pro 665/685/765/785
Note: To reset the Department Code, the following is displayed.
To recover the Department Code already being set, press
1. To set a new Department Code, press 2.
2. To setup the Master Department Code, press
To disable the Department Control feature, press
Exit or Stop.
Note: If the Master Number is assigned, go to step 6 to set
additional Department Codes.
Note: Department code 01 is reserved for the Master Code.
After 2 seconds
Programming the Machine
Set dept. code
1. Recover old data
2. New
.
Enter master code
Dept. number:
Dept. name (20 max):
Enter name
Dept. name (20 max):
. Press
01
2-35