One Touch Dialing - Xerox 665 System Administrator Manual

WorkCentre Pro 665/685/765/785
5. Using the Numeric Keypad, enter the Speed Dial number, then
press Start .
after 2 seconds
The machine automatically dials the phone number, confirms the
connection, and sends the document.

One Touch Dialing

If you programmed a remote party's number to a One Touch key, you
can dial that number by pressing the corresponding One Touch key.
To use this function, the One Touch number must be programmed in
the Phonebook (see "Presetting One Touch Numbers"). To link a One
Touch Key to a Speed Dial or Group Number see "Presetting Speed
Dial Numbers" in Chapter 2 or "Presetting Group Numbers" in
Chapter 8.
To dial the remote station using One Touch dialing:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast .
3. Press a One Touch key.
Dialing Methods
Speed dial
XEROX
Scanning into memory
Job number:
Free memory:
12-01-1999 13:47
Ready
Free memory
Dial or press Copy
One touch key:
XEROX
001
041
85%
100%
01
4-7