Bypass Tray Paper Size Setting - Xerox 665 System Administrator Manual

Programming the Machine

Bypass Tray Paper Size Setting

2-42
1. Select the paper size using the slider at the side of the bypass tray.
Paper size setting:
LGL: Select when you load Legal size paper.
LTR: Select when you load letter size paper.
A4: Select when you load A4 size paper.
: This should only be selected when used with PC Printing.
You select this size when you wish to use another paper size
other than Legal Letter or A4, such as envelopes or labels.
2. Adjust the paper guides to the paper size.
Note: You can load up to 100 sheets of paper (80gsm/20 lbs.) in
the Bypass Tray.
You can print the following paper sizes from the Bypass
Tray.
PC Print: You can select any size of paper within the
specification.
Copy: You can only select A4, Letter, or Legal size paper.
Fax Reception and Report Print: You cannot select the
Bypass Tray.
When printing onto pre-glued C5 envelopes, you may
experience the trailing edge being folded back. If this
happens, please try an envelope where all the edges of the
envelope, other than the opening, are fully glued, leaving
no unglued edges.
Slider
Paper Guide
Exit Tray
WorkCentre Pro 665/685/765/785
08-05