Xerox 665 System Administrator Manual page 59

WorkCentre Pro 665/685/765/785
4. To modify the Department Codes currently set, press
go to Step 5.
To set new Department Codes, press
information as desired. If needed, refer to "Setting the
Department Codes" procedure.
5. Enter the Department number to change, then press Enter .
After 2 seconds
6. To delete this Dept. code, press
To modify this Dept. code, press
To exit without changing this Dept. code, press
7. Modify the information as desired. If needed, refer to "Setting the
Department Codes" procedure. Press Exit or Stop to exit.
Programming the Machine
. Setting the
Set dept. code
1. Recover old data
2. New
Set dept. code
Already assigned
Dept. number:
Dept.
Dept. number
1. Delete
2. Modify
3. Retain
.
.
and
02
.
2-39