Xerox 665 System Administrator Manual page 348

THE USE OF INAPPROPRIATE TEST PROCEDURES AND TEST
EQUIPMENT MAY PROVIDE MISLEADING RESULTS AND MAY
CAUSE DEATH, PERSONAL INJURY AND/OR DAMAGE TO
PROPERTY.
QUESTION: I would like to carry out my own safety tests on the
Xerox equipment in my premises.
ANSWER: You may, of course, request such tests as you deem
necessary to satisfy yourself that your Xerox equipment is safe. Your
Xerox Limited Customer Support will be pleased to advise you on
such testing.
QUESTION: I require records of all tests
ANSWER: After safety testing, your Xerox Limited Customer Service
Engineer will provide you with a certificate which details the results of
all tests completed.
In the event of any defect being noted, the Xerox equipment will be
switched off and disconnected from the supply until the defect has
been corrected. You will be advised of such action to enable such
defects to be corrected.
PLEASE NOTE: YOU MUST ENSURE THAT YOUR XEROX
EQUIPMENT IS SAFE AT ALL TIMES
Please contact us if you have any queries regarding the information
provided in this document.
Xerox Limited Product Safety,
Xerox Limited Technical Centre,
PO Box 17,
Bessemer Road,
Welwyn Garden City,
Herts AL7 1HE, England
Tel + 44 (0) 1707 353434
D-8 WorkCentre Pro 665/685/765/785