Send After Scan Default Setting - Xerox 665 System Administrator Manual

Programming the Machine
2-56

Send After Scan Default Setting

This feature enables you to determine whether the dialing starts while
the machine is scanning the documents or after the machine has
scanned all documents in the Memory Send mode.
Also, if the dialing after scanning is selected, you can select to delete
or send the scanned pages when the memory becomes full during
scanning.
To set the Send After Scan default mode:
1. Press:
Menu
2. To disable Send After Scan, press
To enable Send After Scan, press
3. Select the memory full option.
To delete the pages being scanned, press
To send the pages being scanned, press
4. The menu selection screen redisplays. Press Exit or Stop to
return to the Standby Mode.
*** Menu item numbers may vary according to configurations.
***
Type of send
1. Dial while scan
2. Dial after scan
, then go to step 4.
, then go to step 3.
When memory full
1. Delete scan pages
2. Send scan pages
.
.
WorkCentre Pro 665/685/765/785