Confirmation Report; Starting Rate - Xerox ColorQube 9201 User Manual

Fax Options

Confirmation Report

Select Confirmation Report to print a broadcast report to identify the success or failure of a fax job.
The options displayed depend on the settings enabled in Tools. Refer to the
Accounting guide for more information.
The options are:
Print Confirmation
• Use to print a transmission report
containing details about the fax,
together with a reduced copy of the
first faxed page.
• The Confirmation report is printed
after every transmission.
• When sending a fax to multiple
recipients, one report is printed listing
all of the recipients.
Print On Error Only
• Select this option to print the Confirmation report only if an error occurs with the transmission.
Select Save to save your selections and exit.

Starting Rate

Use Starting Rate to select the speed at which the device starts transmitting your fax job. A high
starting rate should be used in good transmission areas, and a low rate in poor quality areas. The
options are:
Super G3 (33.6 Kbps)
• Determines the transmission rate to
be used based on the maximum
capabilities of the receiving fax
machine.
• This rate minimizes transmission
errors by using Error Correction Mode
(ECM). Initial transmission speed is
33,600 Bits Per Second (bps).
70 ColorQube™ 9201/9202/9203
Fax
Administration and