Chapter 5 Transmitting Documents - Xerox 665 System Administrator Manual

5 Transmitting Documents
WorkCentre Pro 665/685/765/785
The WorkCentre offers various transmission modes to simplify the
faxing process. Each transmission mode may be performed using
any one of the dialing methods described in the previous section.
All documents are transmitted as background jobs unless you use the
Direct Send Transmission mode. If no other jobs are pending, the
machine begins dialing. When the line connects, the transmission
begins. You can set the machine to redial* up to 14 times if a busy
signal is detected.
If you use the Direct Send transmission mode, the machine transmits
the document without storing the image in a memory file. If the call
does not complete successfully, the machine does not retransmit the
document.
Many options can be combined with each job. For example, you can
select Cover Sheet and Delay Start prior to any job (Memory Send,
Group, Mailbox, etc.).
If a communication error occurs during the transmission and the
document is stored in memory, the machine resends beginning with
the first page that did not transmit successfully. When the
transmission completes successfully, the machine disconnects and
returns to the Standby Mode.
If the Confirmation Report feature is enabled, the machine
automatically prints a report after each transmission. To discontinue
printing the report, set the user option to OFF (See Chapter 9,
"Reports").
* Not available in all markets.
Transmitting Documents
5-1