Auxiliary Windows - Garmin G1000 Pilot's Manual

AUXILIARY WINDOWS

The lower right area of the PFD is a shared area that at
any one time can present the following windows:
• TIMER/REFERENCES
• NEAREST
• DIRECT-TO
• FLIGHT PLAN
• PROCEDURES
Timer/References Window
NOTE: Refer to the Aircraft Flight Manual (AFM)
for limitations.
The Timer/References Window is enabled and disabled
by pressing the TMR/REF softkey.
Figure 2-47 Timer/References Window
The following Vspeeds and Vspeed bugs can be set
using the Timer/References Window:
• Best glide speed reference
• Best glide speed bug (ON, OFF)
• Rotation speed reference (V
• V bug (ON, OFF)
R
• Best angle-of-climb speed reference (V
• V bug (ON, OFF)
X
• Best rate-of-climb speed reference (V
• V bug (ON, OFF)
Y
190-00498-00 Rev. A
count direction (UP or DOWN), and timer status (START,
STOP, or RESET).
)
R
)
X
)
Y
Garmin G1000 Pilot's Guide for Cessna Nav III
PRIMARY FLIGHT DISPLAY
Generic Timer
The Generic Timer displays time (hr:min:sec), timer
To change the Generic Timer:
Press the TMR/REF softkey, then turn the large
1.
FMS knob to select the time field (hr:min:
sec).
2. Turn the FMS knobs to set the desired time,
then press the ENT key. The UP/DOWN field is
now highlighted.
3. Turn the small FMS knob to display the UP/
DOWN window.
4. Turn the FMS knob to select 'UP' or 'DOWN',
then press the ENT key. 'START?' is now high-
lighted.
5. Press the ENT key to START, STOP, or RESET the
timer (if the timer is counting DOWN, it must
be reset manually).
Press the CLR key or the TMR/REF softkey to
6.
remove the window.
Figure 2-48 Timer Status Prompts
2-31