Garmin G1000 Pilot's Manual page 225

Intersection Information Page Operations
To change the map range, turn the joystick to the
left to select a lower range, turn it to the right to select
a higher range. NOTE: Intersections can only be selected
by identifier.
To select the Intersection Information Page:
1. From any page, press and momentarily hold
CLR to select the Navigation Map Page. You
may skip this step if you are already viewing
any of the Map Group pages.
Turn the large FMS knob to select the 'WPT'
2.
page group. 'WPT' is displayed in the page
group icon located in the lower right corner
of the display.
Turn the small FMS knob to select the Intersec-
3.
tion Information Page.
190-00498-00 Rev. A
To select an Intersection by using an Identi-
fier:
1.
2.
3.
Garmin G1000 Pilot's Guide for Cessna Nav III
MULTI FUNCTION DISPLAY
With the Intersection Information Page dis-
played, press the FMS knob to activate the
cursor.
Turn the small and large FMS knobs to enter
a name for the identifier and press the ENT
key.
Press the FMS knob to remove the flashing
cursor.
7-89