Garmin G1000 Pilot's Manual page 141

Selecting a Checklist Item
Two methods are available to select a checklist item: (1)
pressing the ENT key; or (2) pressing the DONE softkey.
(1) Pressing the ENT key:
With the desired checklist displayed, turn the FMS
knob to move up and down the checklist and highlight
an item with a hollow white rectangle. The default color
for non-selected checklist items is blue and once the item
is highlighted, the color turns white. To select a checklist
item that is highlighted, press the ENT key. The selected
item turns green in color again for ease of identification,
and then a check mark is placed in the box next to the
item. As an item is selected, the next item is automatically
highlighted for selection. (2) Pressing the DONE Softkey:
Pressing the DONE softkey produces the same results as
pressing the ENT key.
NOTE: All warnings are displayed in yellow for
ease of identification.
Removing the Check Mark from a Checklist
Item
Press the CLR key to remove a check mark from an
item.
Advancing to the Next Checklist
Once the last item in a checklist is selected, the 'GO
TO THE NEXT CHECKLIST?' text is highlighted. Press
the ENT key to advance to the next checklist displayed.
190-00498-00 Rev. A
One-Button Access to Emergency Procedures
The EMERGENCY softkey is available at all times when
the checklist page is displayed. Press the EMERGENCY
softkey at any time to immediately access the emergency
procedures.
Exiting the Checklist Page
The EXIT softkey is available as long as the Checklist
Page is displayed. Press the EXIT softkey or momentarily
hold down the CLR key at anytime to exit the Checklist
Page and return to the last page that was displayed before
the Checklist Page was selected.
Garmin G1000 Pilot's Guide for Cessna Nav III
MULTI FUNCTION DISPLAY
7-5