Garmin G1000 Pilot's Manual page 64

PRIMARY FLIGHT DISPLAY
To activate a Direct-to from the Nearest
Airports Window:
1. From the Nearest Airports Window, turn the
large FMS knob to highlight the desired airport,
then press the Direct-to key. The Direct-to
Window appears.
2. Press the ENT key twice to activate.
To activate a Direct-to from the Airport
Information Window:
1. From the Airport Information Window, press
the Direct-to key.
Press the ENT key twice to activate.
2.
To select a COM frequency:
From the Nearest Airports Window, turn the
large FMS knob to highlight the desired fre-
quency, then press the ENT key. The frequency
is tuned in the standby COM frequency field
selected by the tuning box.
2-34
Direct-to Window
The Direct-to Window is enabled/disabled by pressing
the Direct-to key.
The currently selected waypoint displays the following
information:
Direct-to Navigation
Selection of a waypoint for Direct-to navigation may be
done in the following ways:
Garmin G1000 Pilot's Guide for Cessna Nav III
Figure 2-51 Direct-to Window
• Identifier
• Waypoint symbol
• Waypoint location
• Facility name
• Flight plan waypoint list
• Nearest waypoint List
• Bearing to waypoint
• Distance from waypoint
• Latitude/longitude
• Course to selected waypoint
• By specifying the identifier, waypoint location or
facility name
• By selecting from a list of waypoints in the active
flight plan
• By selecting from a list of the 25 nearest airports
190-00498-00 Rev. A