Garmin G1000 Pilot's Manual page 291

Navigation Map Page Weather Control
Softkeys
The following softkeys control the display of NEXRAD
and XM Lightning weather products on the Navigation
Map Page:
NEXRAD – pressing the NEXRAD softkey displays
NEXRAD weather and coverage information. The
NEXRAD option is mutually exclusive with the
TOPO, TERRAIN, and STORMSCOPE options, that
is, when NEXRAD is activated, TOPO and/or
TERRAIN, and/or STORMSCOPE are turned off.
XM LTNG – pressing the XM LTNG softkey displays
XM lightning information. XM Lightning is mutu-
ally exclusive with the STORMSCOPE option.
To display weather data on the Navigation
Map Page:
1. Press the MAP softkey.
2. Press the NEXRAD or XM LTNG softkey to dis-
play the desired weather. Press the applicable
softkey again to remove weather data from the
Navigation Map Page.
190-00498-00 Rev. A
Navigation Map Setup Options
The user can customize the display of XM weather on
the Navigation Map Page by using the Map Setup Weather
Group Options Menu (Figure 8-8). The following options
are available:
Garmin G1000 Pilot's Guide for Cessna Nav III
OPTIONAL EQUIPMENT
• NEXRAD DATA - Turns the display of NEXRAD data
and radar coverage on or off and selects the desired
display range.
• XM LTNG - Turns the display of XM Lightning on
or off and selects the desired display range.
• CELL MOVEMENT - Turns the display of storm cell
movement on or off. The Cell Movement option is
only shown when NEXRAD is turned on.
Figure 8-8 Map Setup Options
8-13