Garmin G1000 Pilot's Manual page 227

NDB Information Page Operations
The NDB Information Page allows the following
operations:
• NDB selection by identifier
• NDB selection by name
• NDB selection by closest city
To change the map range, turn the joystick to the left to
select a lower range, turn it to the right to select a higher
range.
To select the NDB Information Page:
From any page, press and hold the CLR key to
1.
select the Navigation Map Page. You may skip
this step if you are already viewing any of the
Map Group pages.
Turn the large FMS knob to select the 'WPT'
2.
page group. 'WPT' is displayed in the page
group icon located in the lower right corner
of the display.
Turn the small FMS knob to select the NDB
3.
Information Page.
To select a NDB by using an Identifier:
1. With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
Turn the small and large FMS knobs to enter
2.
a name for the identifier and press the ENT
key.
Press the FMS knob to remove the flashing
3.
cursor.
190-00498-00 Rev. A
To select a NDB by using a Name:
1.
2.
3.
4.
To select a NDB by using the closest city:
1.
2.
3.
4.
Garmin G1000 Pilot's Guide for Cessna Nav III
MULTI FUNCTION DISPLAY
With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
Turn the large FMS knobs to highlight the name
field
Turn the large and small FMS knobs to enter
a name and press the ENT key.
Press the FMS knob to remove the flashing
cursor.
With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
Turn the large FMS knobs to highlight the clos-
est city field
Turn the large and small FMS knobs to enter
a city and press the ENT key.
Press the FMS knob to remove the flashing
cursor.
7-91