Garmin G1000 Pilot's Manual page 154

MULTI FUNCTION DISPLAY
MFD Data Bar
The MFD Navigation Status Window displays four,
user-configurable fields which can display the following
data:
• Bearing to next waypoint (BRG)
• Distance to next waypoint (DIS)
• Desired track to next waypoint (DTK)
• En-route safe altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time Enroute (ETE)
• Ground Speed (GS)
• Maximum Safe Altitude (MSA)
• Track angle error (TKE)
• Track angle (TRK)
• Vertical speed required (VSR)
• Cross track error (XTK)
• Currently selected MFD page title
Figure 7-12 MFD Data Bar (default)
NOTE: Instructions on changing a data field on
the MFD Data Bar is given in the System Setup
Section.
Navigation Map Page Options Menu
The Navigation Map Page can be customized using op-
tions listed in the Navigation Map Page menu. To display
the menu, press the MENU key (with the Navigation Map
Page displayed). Two options are available: Map Setup,
and Measure Bearing/Distance.
7-18
Map Setup
The first option is 'Map Setup' which is used to config-
ure the Navigation Map Page including map orientation,
land data enable/disable, Jeppesen data enable/disable,
automatic zoom, airspace boundaries, and text size.
Map Group Options
Garmin G1000 Pilot's Guide for Cessna Nav III
Figure 7-13 Map Group Setup Options
190-00498-00 Rev. A