Navigation Map Page - Garmin G1000 Pilot's Manual

OPTIONAL EQUIPMENT
To display the Weather Group Options:
1. With the Navigation Map Page displayed, press
the MENU key to display the Navigation Map
Setup Menu. The cursor flashes on the 'Map
Setup' option.
2. Press the ENT key. The Map Setup Menu is
displayed. Turn the small FMS knob to select
the 'Weather' group.
To turn Stormscope Lightning Data on or
off:
1. With the Weather Group selected, press the
ENT key. The cursor flashes on 'STRMSCP
LTNG'.
2. Turn the FMS knob to display the 'On/Off'
window.
Turn the FMS knob to select 'On' or 'Off' and
3.
press the ENT key.
4. Press the FMS knob to return to the Navigation
Map Page.
To select 'cell' or 'strike' as the Stormscope
lightning mode:
1. With the Weather Group selected, press the
ENT key. The cursor flashes on 'STRMSCP
LTNG'.
Turn the large FMS knob to select 'STRMSCP
2.
MODE'.
3. Turn the FMS knob to display the 'Cell/Strike'
window.
Turn the FMS knob to select 'Cell' or 'Strike'.
4.
Press the ENT key.
5. Push the FMS knob to return to the Navigation
Map Page.
8-4
To select a Stormscope lightning symbol
zoom range:
1.
2.
3.
4.
5.
Clearing Stormscope Lightning Data Using the
Navigation Map Page Options Menu
Stormscope data can be cleared from the Navigation
Map Page by using the third Navigation Map Page Menu
option, 'Clear Lightning Data'.
To remove Stormscope lightning data from
the Navigation Map Page:
1.
2.
Garmin G1000 Pilot's Guide for Cessna Nav III
With the Weather Group selected, press the
ENT key. The cursor flashes on 'STRMSCP
LTNG.
Turn the large FMS knob to select 'STRMSCP
SMBL'.
Turn the small FMS knob to display the range
window.
Turn the FMS knob to select the desired range
and press the ENT key.
Push the FMS knob to return to the Navigation
Map Page.
NOTE: Periodically clearing Stormscope lightning
data while monitoring thunderstorms is a good
way to determine if a storm is building or dissi-
pating. Stormscope lightning data in a building
storm will reappear faster and in larger numbers.
Stormscope lightning data in a dissipating storm
will appear slower and in smaller numbers.
Press the MENU key with the Navigation Map
Page displayed.
Turn the FMS knob to highlight 'Clear Lightning
Data' and press the ENT key.
190-00498-00 Rev. A