Garmin G1000 Pilot's Manual page 71

To determine the closest point along the
active flight plan to a selected waypoint:
From the Flight Plan Window, press the MENU
1.
key to display the page menu options.
2. Turn the FMS knob to highlight 'Closest Point
of FPL', then press the ENT key. A window
appears with the reference waypoint field
highlighted.
3. Turn the FMS knobs to enter the identifier of the
reference waypoint, then press the ENT key. The
G1000 displays the bearing (BRG) and distance
(DIS) to the closest point along the flight plan
from the selected reference waypoint.
4. To create a user waypoint at this location and
add it to the flight plan, press the ENT key. The
name for the new user waypoint is derived from
the identifier or the reference waypoint.
Change Fields
Change Fields allows the pilot to select the desired
data items to be displayed on the Flight Plan Window.
The user-selectable data fields can be changed to display
the following information:
• Cumulative Distance (CUM)
• Distance (DIS)
• Desired Track (DTK)
• En route Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time En route (ETE)
190-00498-00 Rev. A
To change a data field on the Flight Plan
Window:
1.
2.
3.
4.
5.
6.
Restore Defaults
Restore Defaults restores all data fields to the factory
default settings.
To restore factory default settings for data
fields on the Flight Plan Window:
1.
2.
Garmin G1000 Pilot's Guide for Cessna Nav III
PRIMARY FLIGHT DISPLAY
Figure 2-64 Change Fields on Flight Plan
From the Flight Plan Window, press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'Change Fields',
then press the ENT key. The cursor flashes on
one of the data fields.
Turn the large FMS knob to highlight the desired
field to be changed.
Turn the small FMS knob to display a window
with optional data items.
Turn the FMS knob to select the desired data
item, then press the ENT key.
Press the small FMS knob to remove the
cursor.
From the Flight Plan Window, press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'Restore
Defaults', then press the ENT key.
2-41