Garmin G1000 Pilot's Manual page 70

PRIMARY FLIGHT DISPLAY
Load Approach
Load Approach allows the pilot to select a published
instrument approach for the destination airport, or replace
the current approach with a new selection.
To select an approach for a direct-to or
flight plan destination airport:
1. From the Flight Plan Window, press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'LoadApproach',
2.
then press the ENT key. A window appears list-
ing the available approaches for the destina-
tion airport.
Turn the FMS knob to select the desired
3.
approach, then press the ENT key. A window
appears listing the available transitions for the
approach.
4. Turn the FMS knob to select the desired transi-
tion or vectors, then press the ENT key.
NOTE: The 'Vectors' option assumes that the pilot
will receive vectors from ATC to the final course
segment of the approach.
5. With 'LOAD?' highlighted, press the ENT key
to load the approach.
6. To activate the approach, turn the large FMS
knob to highlight 'ACTIVATE?', then press the
ENT key.
NOTE: 'LOAD' adds the approach to the flight
plan without immediately using the approach
for navigation guidance. This allows the pilot to
continue navigating the original flight plan until
cleared for the approach, but keeps the approach
available for quick activation when needed.
'ACTIVATE' adds the approach to the flight plan
and begins navigating the approach course.
2-40
Remove Departure, Arrival, or Approach
Remove Departure, Arrival, or Approach deletes the
current standard instrument departure (SID), terminal
arrival route (STAR), or selected approach from the active
flight plan.
To remove a departure, an arrival, or an
approach from a direct-to or active flight
plan:
1.
2.
3.
4.
Closest Point of FPL
Closest Point of FPL calculates the bearing and closest
distance at which a flight plan passes from a reference
waypoint. It may also be used to create a new user
waypoint along the flight plan at the location closest to a
chosen reference waypoint.
Garmin G1000 Pilot's Guide for Cessna Nav III
From the Flight Plan Window, press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'Remove Depar-
ture', 'Remove Arrival', or 'Remove Approach',
then press the ENT key. A confirmation window
appears listing the procedure that is about to
be removed, with 'OK' highlighted.
Press the ENT key to remove the procedure.
To cancel, turn the large FMS knob to highlight
'CANCEL', then press the ENT key.
Figure 2-63 Closest Point of FPL Window
190-00498-00 Rev. A