Garmin G1000 Pilot's Manual page 68

PRIMARY FLIGHT DISPLAY
Delete Flight Plan
The entire flight plan or selected waypoints within the
flight plan may be deleted.
To delete the entire flight plan:
From the Flight Plan Window, press the MENU
1.
key to display the page menu options.
Turn the FMS knob to highlight 'Delete Flight
2.
Plan', then press the ENT key. The 'Delete All
Waypoints in Flight Plan' message is displayed
with 'OK' highlighted.
3. Press the ENT key to delete all waypoints in the
flight plan.
To cancel, turn the large FMS knob to highlight
4.
'CANCEL' and press the ENT key.
To delete selected waypoints in the flight
plan:
From the Flight Plan Window, turn the large
1.
FMS knob to select the desired waypoint.
Press the CLR key. The 'Remove Waypoint
2.
Name' Window is displayed with 'OK' high-
lighted. Press the ENT key to delete the
selected waypoint.
3. To cancel, turn the large FMS knob to highlight
'CANCEL' and press the ENT key.
Figure 2-58 Delete Flight Plan Confirmation Window
2-38
Load Departure
Load departure allows the pilot to select a published
standard instrument departure (SID) for the departure
airport or replace the current departure with a new
selection. When using a direct-to, the G1000 uses the
nearest airport as a reference for displaying available
departures.
To select a departure for the departure
airport:
1.
2.
3.
4.
Garmin G1000 Pilot's Guide for Cessna Nav III
NOTE The PROC key can also be used to load a
:
departure, an approach, or an arrival.
From the Flight Plan Window , press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'Load Depar-
ture', then press the ENT key. A window
appears listing the available departures for the
departure airport.
Figure 2-59 Departure
Turn the FMS knob to select the desired depar-
ture, then press the ENT key.
A window may appear listing runways for the
departure. Turn the FMS knob to select the
desired runway, then press the ENT key. The
transition window is now displayed.
190-00498-00 Rev. A