Garmin G1000 Pilot's Manual page 254

MULTI FUNCTION DISPLAY
The Display Units section of the System Setup Page
allows the following operations:
• To select a Nav Angle (auto, true)
• To select Distance and speed units (metric or
nautical)
• To select Altitude and vertical speed units (feet,
meters)
• To select Barometric pressure units (inches of
mercury, hectopascals)
• To select Temperature units (Celsius, Fahrenheit)
• To select Fuel and fuel flow units (gallons, impe-
rial gallons, kilograms, liters, pounds)
• To select position
To change a Display Units setting:
1. Select the System Setup Page.
Press the FMS knob momentarily, to activate
2.
the flashing cursor.
3. Turn the large FMS knob to highlight the
desired 'DISPLAY UNITS' field.
Turn the small FMS knob to display the options
4.
list for the selected item.
5. Turn the FMS knob to highlight the new selec-
tion.
Press the ENT key.
6.
7-118
Map Datums
The Map Datum section of the System Setup Page allows
selection of map datums to be used by the G1000 from a
list of datums available in the current aviation database
(See Appendix D for a list of available map datums).
NOTE: Per TSO C129a, the WGS-84 map datum should
be used in the United States. For use outside the U.S.,
select the geodetic datum required by that country.
To select a Map Datum:
1.
2.
3.
4.
5.
6.
Garmin G1000 Pilot's Guide for Cessna Nav III
Select the System Setup Page.
Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to highlight the
desired 'MAP DATUM' field.
Turn the small FMS knob to display the Map
Datum list.
Turn the FMS knob to highlight the new
datum.
Press the ENT key.
190-00498-00 Rev. A