Garmin G1000 Pilot's Manual page 92

NAV/COM
To load a COM frequency into the COM tuning
box:
1. When the list of frequencies for the selected
airport is displayed, highlight the desired
frequency by turning the large FMS knob.
2. Press the ENT key.
The Pilot Controlled Lighting (PCL) frequency, located
in the Runways box of the INFO portion of the Airport
Information Page, may also be highlighted and loaded
into the COM tuning box.
3-12
Figure 3-23 WPT – Airport Information Page (APR)
(Cessna 172 Shown)
Garmin G1000 Pilot's Guide for Cessna Nav III
To load the primary approach NAV frequency
into the NAV tuning box:
1 On the Airport Information Window, press the
APR softkey to display approach information
for a specific airport.
2. Press the FMS knob to activate the selection
cursor in the window.
Turn the large FMS knob to highlight the
3.
primary NAV frequency located in the Primary
Frequency box.
Press the ENT key.
4.
190-00498-00 Rev. A