Garmin G1000 Pilot's Manual page 256

MULTI FUNCTION DISPLAY
To turn an Airspace Alert on or off:
1. Select the System Setup Page.
Press the FMS knob momentarily, to activate
2.
the flashing cursor.
3. Turn the large FMS knob to highlight the
desired 'AIRSPACE ALERTS' field.
Turn the small FMS knob to display the options
4.
list.
5. Turn the FMS knob to select 'YES' or 'NO' and
press the ENT key.
To change the altitude buffer distance set-
ting:
1. Select the System Setup Page.
2. Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to highlight the 'ALTI-
3.
TUDE BUFFER' field.
4. Turn the small and large FMS knobs to select an
altitude buffer value and press the ENT key.
Arrival Alerts
An arrival alert, provided on the System Setup Page,
can be set to notify you with a message when you have
reached a user-defined distance to the final destination
(the direct-to waypoint or the last waypoint in a flight
plan). Once you have reached the set distance (up to 99.9
units), an "Arrival at [waypoint]"message is displayed on
the PFD Navigation Status Bar.
7-120
The Arrival Alert section of the System Setup Page dis-
plays the following information:
The Arrival Alerts section of the System Setup Page al-
lows the following operations:
To enable/disable an Arrival Alert:
1.
2.
3.
4.
5.
To change the Arrival Alert trigger distance
setting:
1.
2.
3.
4.
Garmin G1000 Pilot's Guide for Cessna Nav III
• Arrival alert setting
• Trigger distance for arrival alerts
• Enabling and disabling of arrival alert
• Setting trigger distance for arrival alerts
Select the System Setup Page.
Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to select the ARRIVAL
ALERT On/Off field.
Turn the small FMS knob to display the options
list.
Turn the FMS knob to select the desired option
and press the ENT key.
Select the System Setup Page.
Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to highlight the
desired ARRIVAL ALERT distance field.
Turn the small and large FMS knobs to enter a
trigger distance and press the ENT key.
190-00498-00 Rev. A