Garmin G1000 Pilot's Manual page 319

GMA 1347 Message Advisories
Alerts Window Message
GMA1 FAIL – GMA1 is inoperative.
GMA1 CONFIG – GMA1 configuration
error. Config service req'd.
MANIFEST – GMA1 software
mismatch. Communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
BACKUP PATH – Audio panel 1 using
backup data path.
GIA 63 Message Advisories
Alerts Window Message
GIA1 CONFIG – GIA1 configuration
error. Config service req'd.
GIA2 CONFIG – GIA2 configuration
error. Config service req'd.
GIA1 COOLING – GIA1 temperature
too low.
GIA2 COOLING – GIA2 temperature
too low.
GIA1 COOLING – GIA1 over
temperature.
GIA2 COOLING – GIA2 over
temperature.
GIA1 SERVICE – GIA1 needs service.
Return the unit for repair.
GIA2 SERVICE – GIA2 needs service.
Return the unit for repair.
190-00498-00 Rev. A
Comments
The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
The audio panel has incorrect software installed. The G1000 system should be
serviced.
The audio panel self-test has detected a problem in the unit. Certain audio functions
may still be available, and the audio panel may still be usable. The G1000 system
should be serviced when possible.
The #1 audio panel is using a backup communication path. The G1000 system
should be serviced when possible.
Comments
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
The GIA1 and/or GIA2 temperature is too high. If problem persists, the G1000
system should be serviced.
The GIA1 and/or GIA2 self-test has detected a problem in the unit. The G1000
system should be serviced.
Garmin G1000 Pilot's Guide for Cessna Nav III
ANNUNCIATIONS & ALERTS
9-11