Garmin G1000 Pilot's Manual page 67

Activate Leg
Activate leg selects the highlighted leg as the "active leg"
(the flight plan leg which is currently used for navigation
guidance).
To activate a flight plan along a specific
leg:
1. From the active Flight Plan Window, press the
FMS knob to activate the cursor, and turn the
large FMS knob to highlight the desired desti-
nation waypoint.
Press the MENU key, highlight 'Activate Leg' and
2.
press the ENT key. A confirmation window is
displayed with 'ACTIVATE' highlighted. Press
the ENT key.
Figure 2-54 Activate Leg Confirmation Window
Store Flight Plan
NOTE: The active flight plan is erased when the
unit is turned off and when another flight plan
is activated.
When storing flight plans with an approach, departure,
or arrival, the G1000 uses the waypoint information from
the current database to define the waypoints. If the
navigation database is changed or updated, the G1000
automatically updates the information if the procedure has
not been modified. If an approach, departure, or arrival
procedure is no longer available, the flight plan becomes
locked until the procedure is deleted from the flight plan
or until the correct navigation database is installed.
190-00498-00 Rev. A
To store a flight plan:
1.
2.
3.
4.
Invert Flight Plan
The Invert Flight Plan option reverses the active flight
plan. After traveling along a flight plan, the pilot may
wish to reverse the route for navigation back to the original
departure point.
To activate an existing flight plan in
reverse:
1.
2.
Garmin G1000 Pilot's Guide for Cessna Nav III
PRIMARY FLIGHT DISPLAY
From the Flight Plan Window, once all of the
waypoints have been entered, press the MENU
key to display the page menu options.
Turn the FMS knob to select 'Store Flight Plan',
then press the ENT key. The Store Flight Plan
Window is displayed with 'OK' highlighted.
Press the ENT key to store the flight plan.
To cancel, turn the large FMS knob to highlight
'CANCEL' and press the ENT key.
Figure 2-55 Page Options Menu
From the Flight Plan Window, press the MENU
key to display the page menu options.
Turn the FMS knob to highlight 'Invert Flight
Plan', then press the ENT key. The flight plan
is now reversed and activated.
Figure 2-56 Invert Flight Plan Confirmation Window
2-37