Garmin G1000 Pilot's Manual page 284

OPTIONAL EQUIPMENT
To change the Stormscope lightning mode
between 'cell' and 'strike':
1. Select the Stormscope Page.
Press the MODE softkey. The CELL and STRIKE
2.
softkeys are displayed. Press the CELL softkey
to display 'CELL' data or press the STRIKE
softkey to display 'STRIKE' data. 'CELL' or
'STRIKE' is displayed in the mode box located in
the upper left corner of the Stormscope Page
OR:
Press the MENU key. The page menu is
3.
displayed with 'Strike Mode' or 'Cell Mode'
highlighted (Figure 8-4). Press the ENT key on
the desired selection.
To change the viewing mode between
360˚and 120˚:
1. Select the Stormscope Page.
2. Press the VIEW softkey. The 360 and ARC
softkeys are displayed. Press the 360 softkey
to display a 360˚ viewing area or press the ARC
softkey to display a 120˚ viewing area
OR:
3. Press the MENU key. The page menu is
displayed. Turn the FMS knob to select the
desired view. Press the ENT key on the desired
selection.
8-6
To clear Stormscope lightning data from
the display:
1.
OR: Press the MENU key (Figure 8-5). Select 'Clear
Garmin G1000 Pilot's Guide for Cessna Nav III
Press the CLEAR softkey to remove all
Stormscope lightning data from the display
Lightning Data' and press the ENT key.
Figure 8-4 Weather Group Map Setup Menu
Figure 8-5 Navigation Map Page Options Menu
190-00498-00 Rev. A