Garmin G1000 Pilot's Manual page 36

PRIMARY FLIGHT DISPLAY
• CDI – Changes navigation mode on the CDI to
GPS, NAV1, or NAV2
• DME (optional) – Displays DME Tuning Window
• OBS – Selects OBS mode on the CDI when navi-
gating by GPS (only available with active leg)
• XPDR – Displays transponder mode selection
softkeys:
STBY – Selects standby mode
ON – Selects Mode A
ALT – Selects altitude reporting mode
VFR – Automatically enters the VFR code (1200
in the U.S.A. only)
CODE – Displays transponder code selection
softkeys 0-7
0 through 7 – Use numbers to enter code
IDENT – Provides special aircraft position
identification to Air Traffic Control (ATC)
BKSP – Removes numbers entered one by one
BACK – Returns to previous level softkeys
IDENT – Provides special aircraft position identi-
fication to ATC
BACK – Returns to previous level softkeys
2-6 Garmin G1000 Pilot's Guide for Cessna Nav III
• IDENT – Provides special aircraft position identi-
fication to ATC
• TMR/REF – Displays Timer/References Window
• NRST – Displays Nearest Airports Window
• ALERTS – Displays Alerts Window
190-00498-00 Rev. A