Garmin G1000 Pilot's Manual page 157

Track Vector
The Navigation Map Page can display a track vector as
a dashed cyan line segment with an arrowhead attached
to the end, extended to a predicted location in 60 seconds
along the current aircraft track. The track vector is useful
in minimizing track angle error.
To enable/disable the track vector:
1. With the Navigation Map Page displayed, press
the MENU key to display the Navigation Map
Page Menu. The cursor flashes on the 'Map
Setup' option.
Press the ENT key. The Map Setup Menu is
2.
displayed.
3. Turn the small FMS knob to select the 'Map'
group and press the ENT key.
Turn the large FMS knob to highlight the
4.
'TRACK VECTOR' field.
5. Turn the small FMS knob to select 'On' or
'Off'. Press the ENT key to accept the selected
option.
Press the FMS knob to return to the Navigation
6.
Map Page.
190-00498-00 Rev. A
Wind Vector
The wind vector box is displayed in the upper right
corner of the Navigation Map Page and displays wind
direction and speed (in knots). Wind direction is
indicated by a 360 degree pointing arrow.
To enable/disable the wind vector box:
1.
2.
3.
4.
5.
6.
Garmin G1000 Pilot's Guide for Cessna Nav III
MULTI FUNCTION DISPLAY
With the Navigation Map Page displayed, press
the MENU key to display the Navigation Map
Page Menu. The cursor flashes on the 'Map
Setup' option.
Press the ENT key. The Map Setup Menu is
displayed.
Turn the small FMS knob to select the 'Map'
group and press the ENT key.
Turn the large FMS knob to highlight the 'WIND
VECTOR' field.
Turn the small FMS knob to select 'On' or
'Off'. Press the ENT key to accept the selected
option.
Press the FMS knob to return to the Navigation
Map Page.
7-21